PERRIS 350 APHIGH SPEED CUTTING OFF MACHINE FOR ALUMINIUM AND LIGHT ALLOYS
SYNONYMOUS WITH PERFECTION. project which is
synonymous with rapid cutting off machines for
aluminium and light alloys. Flexibility of
operation and absolute cutting accuracy make
this machine the most reliable solution when
cutting non-ferrous sections.
ALWAYS THE CORRECT CUTTING ANGLE. The graduated
turntable rotates on hardened ball bearings with
automatic stops at 90°, 45° right and 45° left
and manual locking for intermediate angles. The
cutting head can also be tiled up to 45° in the
vertical plane for bevel cuts.
MACHINE COMPLETE WITH:
• Mechanism for the rotation of head block for
angled cuts up to 60° left, 45° right and 45°
off the vertical.
• Two pneumatic vices adjustable both lengthwise
and laterally.
• Pneumatic cylinder for head movement, with
brake for speed adjustment.
• Two speeds of blade rotation obtainable by
means of inversion of the pulleys.
• Perfectly balanced head, tilting upon shielded
ball bearings.
• 600 mm step feeder controlled by pneumatic
cylinder
• Repeater up to maximum of 9 steps so as to
reach a total stroke of 5400 mm.
• Maximum opening of feeder collet = 160 mm.
• Programmable piece counter.
• Minimum scrap on final cut = 360 mm.
• Feeder speed adjustment valve.
• Ammeter.
• Emergency push button with key and lockable
switch on control panel.
• Vaporizer.
• Complete protection guard with rapid blade
change system.
• Instruction book for use and maintenance.
• Set of wrenches for the maintenence.
ACCESSORIES AVAILABLE UPON REQUEST:
• Sectional pedestal in metal sheet, 34 kg.
• Pedestal in welded metal sheet, 49 kg.
• Roller table for piece loading and unloading.
• Coolant liquid.
TECHNICAL DATA
kW
2.2
RPM
2400 / 3400
mm
177
mm
350
Kg
390
dBA
89
CUTTING SPECS
mm
95
100
95
50
mm
95
95
90
50
mm
130 x 55
155 x 90
130 x 55
150 x 40
If you want to learn more about this
product, please download the PDF data
sheet by clicking on the icon above.
